Canon imageRUNNER 1740 E001 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1740 E001 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1740 E001 0001 Error Code
E001 0001
Description :
Detection of overheating of Fixing Assembly
Causes :
The hardware circuit detected overheating of the Main Thermistor or Sub Thermistor for 30 msec or longer.
Solutions :
1. Go through the following to clear the error: CLEAR > ENGIN > ERRCLR in Service Mode; then, turn OFF and then ON the power.
2. Replace the DC Controller PCB (PCB1).
Do not forget, not every error is completely identical. What remedies the condition one time will possibly not fix it the next occasion. While the ideas in this posting is obtained from the service manual and generally should get your product operational, occasionally other factors could possibly be in play.
If you are looking at this write-up and have knowledge about this error and want to share please be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have experience with the trouble then I will answer.
