Canon imageRUNNER 1730iF E822 0005 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730iF E822 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730iF E822 0005 Error Code
E822 0005
Description :
Error in rotation of the Delivery Cooling Fan (Rear) (FM1)
Causes :
A lock signal was detected for 5 seconds while the Delivery Cooling Fan (Rear) (FM1) was being driven.
The same status was detected again after executing an error retry.
Solutions :
1. Disconnect and then connect the connector (J210) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Delivery Cooling Fan (Rear) (FM1).
3. Replace the DC Controller PCB (PCB1).
Do not forget, not every error is completely identical. What corrects the trouble one time may possibly not get rid of it the next time. While the details in this short article is obtained from the service manual and normally should get your machine operating, occasionally additional factors might be in play.
If you are looking at this write-up and have information about this malfunction and want to contribute be sure to leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the difficulty then I will answer back.
