Canon imageRUNNER 1730iF E820 0003 Error Code

 

Canon imageRUNNER 1730iF E820 0003 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1730iF E820 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1730iF E820 0003 Error Code

Service Manual Instructions for the Canon imageRUNNER 1730iF E820 0003 Error Code

E820 0003
Description :
Error in rotation of the Developing Cooling Fan (Rear) (FM8)

Causes :
A lock signal was detected for 5 seconds while the Developing Cooling Fan (Rear) (FM8) was being driven.
The same status was detected again after executing an error retry.

Solutions :
1. Disconnect and then connect the connector (J209) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Developing Cooling Fan (Rear) (FM8).
3. Replace the DC Controller PCB (PCB1).



Do not forget, not every error is absolutely the same. What remedies the trouble one occasion may not take care of it the next occasion. While the help and advice in this text is taken from the service manual and most likely ought to get your piece of equipment ready to go, in some cases other elements can be in play.

If you are looking at this write-up and have experience with this fault and wish to share please leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have information about the trouble then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart