Canon imageRUNNER 1730iF E804 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730iF E804 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730iF E804 0001 Error Code
E804 0001
Description :
Error in rotation of the Power Supply Cooling Fan (FM4)
Causes :
A lock signal could not be detected for 5 seconds while the Power Supply Cooling Fan (FM4) was being driven.
The same status was detected again after executing an error retry.
Solutions :
1. Disconnect and then connect the connector (J209) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Power Supply Cooling Fan (FM4).
3. Replace the DC Controller PCB (PCB1).
Bear in mind, not every error is totally identical. What fixes the problem one time may not get rid of it the next occasion. While the details in this writing is taken from the service manual and normally ought to get your unit working, now and again other elements can be in play.
If you are looking at this short article and have knowledge about this error message and desire to make a contribution please make sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the situation then I will answer back.
