Canon imageRUNNER 1730iF E577 8002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730iF E577 8002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730iF E577 8002 Error Code
E577 8002
Description :
Paddle Motor (M3) error
Causes :
The Paddle Motor (M3) was driven for 2 seconds, but the Paddle could not be detected by the Paddle HP Sensor (S3).
Solutions :
1. Check the connector connection of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
2. Check for open circuit of the Harness of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
3. Replace the Paddle HP Sensor (S3).
4. Replace the Paddle Motor (M3).
5. Replace the Finisher Controller PCB.
Bear in mind, not every error is simply identical. What corrects the condition one time may not take care of it the next time. While the info in this text originates from the service manual and normally ought to get your equipment up and running, on occasion other factors could possibly be in play.
If you are looking at this short article and have expertise in this error message and would wish to contribute please make sure to leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have exposure to the problem then I will answer.
