Canon imageRUNNER 1730iF E575 8004 Error Code

 

Canon imageRUNNER 1730iF E575 8004 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1730iF E575 8004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1730iF E575 8004 Error Code

Service Manual Instructions for the Canon imageRUNNER 1730iF E575 8004 Error Code

E575 8004
Description :
Gripper Motor (M7) clock error

Causes :
When the Gripper Motor (M7) was operated, the Gripper Encoder Sensor (S8) detected rotation of 400 clocks or more.

Solutions :
1. Check the connector connection of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7).
2. Check for open circuit of the Harness of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7).
3. Replace the Gripper Encoder Sensor (S8).
4. Replace the Gripper Motor (M7).
5. Replace the Finisher Controller PCB.


Bear in mind, not every error is precisely the same. What treats the problem one occasion will possibly not remedy it the next time. While the material in this blog post comes from the service manual and typically should get your piece of equipment working, in some cases other things may be in play.

If you are looking at this short article and have expertise in this error and want to make a contribution please leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have information about the problem then I will respond.

We will be happy to hear your thoughts

Leave a reply

Shopping cart