Canon imageRUNNER 1730iF E261 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730iF E261 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730iF E261 0000 Error Code
E261 0000
Description :
Zero cross signal error
Causes :
When the relay is ON, the zero cross signal failed to be detected for 500 msec or longer.
When the same status was detected again after executing an error retry.
Solutions :
1. Check the connector connection. (All connectors on the DC Controller PCB)
2. Replace the DC Controller PCB (PCB1).
Bear in mind, not every error is exactly alike. What treats the difficulty one time will possibly not resolve it the next time. While the data in this blog post comes from the service manual and generally should get your machine ready to go, in some cases other reasons could possibly be in play.
If you are looking at this post and have expertise in this fault and want to contribute please leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have information about the situation then I will answer back.
