Canon imageRUNNER 1730iF E110 0003 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730iF E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730iF E110 0003 Error Code
E110 0003
Description :
Laser Scanner Motor error
Causes :
The speed lock signal of the Laser Scanner Motor never showed lock status although 6.5 seconds (when switching from low speed to normal speed) or 8 seconds (when switching from normal speed to low speed) have passed.
When the same status was detected again after executing an error retry.
Solutions :
1. Check the Laser Scanner Unit connector.
2. Replace the Laser Scanner Unit.
3. Replace the DC Controller PCB (PCB1).
Bear in mind, not every error is completely the same. What corrects the complication one time may possibly not resolve it the next time. While the ideas in this document is obtained from the service manual and generally ought to get your device ready to go, in some cases other factors can be in play.
If you are looking at this piece of content and have knowledge about this problem and would like to share please leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will answer back.
