Canon imageRUNNER 1730iF E020 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730iF E020 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730iF E020 0000 Error Code
E020 0000
Description :
Detection of toner clog between the Hopper and the Developing Assembly
Causes :
When the Developing Assembly Toner Sensor (TS2) detected “tonerabsent” and the Hopper Toner Sensor (TS1) detected “toner-present”, the Hopper Motor (M6) was rotated 194 times with intermissions of 1 second, but the Developing Assembly Toner Sensor (TS2) could not detect “toner-present”.
If paper is being fed, the error occurs after the paper has been delivered.
Solutions :
1. Check rotation of the Hopper Motor Gear. (If it is rotating, the sensor may not be detecting correctly. In that case, execute Service Mode>CLEAR>ENGIN>TNRINST to supply toner to the Developing Assembly.)
2. Replace the Developing Assembly Toner Sensor (TS2).
3. Replace the Hopper Toner Sensor (TS1).
4. Replace the DC Controller PCB (PCB1).
Bear in mind, not every error is completely alike. What remedies the malfunction one time may not fix it the next occasion. While the tips in this written piece hails from the service manual and in most cases should get your product functioning, on occasion other factors could possibly be in play.
If you are looking at this piece of content and have information about this error and wish to make a contribution you should leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the difficulty then I will answer.
