Canon imageRUNNER 1730iF E013 0001 Error Code

 

Canon imageRUNNER 1730iF E013 0001 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1730iF E013 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1730iF E013 0001 Error Code

Service Manual Instructions for the Canon imageRUNNER 1730iF E013 0001 Error Code

E013 0001
Description :
Error in rotation of Waste Toner Motor (M3)

Causes :
Lock detection flag was monitored every 2msec, and the same level was detected 600 times in a row.

Solutions :
1. Check the connector connection between the Waste Toner Motor and the DC Controller PCB (J209).
2. Replace the Waste Toner Motor (M3).
3. Replace the DC Controller PCB (PCB1).



Bear in mind, not every error is absolutely the same. What corrects the problem one occasion may not fix it the next occasion. While the material in this document is obtained from the service manual and typically should get your equipment operational, from time to time other variables might be in play.

If you are looking at this piece of content and have expertise in this malfunction and would wish to make a contribution make sure you leave a comment down below. Or, if you have read this article and have further questions then ask. If I have knowledge about the problem then I will reply.

We will be happy to hear your thoughts

Leave a reply

Shopping cart