Canon imageRUNNER 1730iF E002 0000 Error Code

 

Canon imageRUNNER 1730iF E002 0000 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1730iF E002 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1730iF E002 0000 Error Code

Service Manual Instructions for the Canon imageRUNNER 1730iF E002 0000 Error Code

E002 0000
Description :
Error in temperature rising of Fixing Assembly

Causes :
1. The Main Thermistor detected a temperature lower than 115 deg C for 400 msec or longer on end 6.0 seconds after the Main Thermistor detected 100 deg C.
2. The Main Thermistor detected a temperature lower than 150 deg C for 400 msec or longer on end 6.0 seconds after the Main Thermistor detected 140 deg C.

Solutions :
1. Go through the following to clear the error: CLEAR > ENGIN > ERRCLR in Service Mode; then, turn OFF and then ON the power.
2. Check the connector connection. (J206 on the DC Controller PCB, J101 on the Power Supply PCB)
3. Replace the Fixing Assembly.
4. Replace the DC Controller PCB (PCB1).


Canon FM1-B701-000 Fuser (Fixing) Unit – 110 / 120 Volt (Genuine) – $279.95

from: Precision Roller

Canon imageRUNNER 1730 E000, E001, E002, E003, Error Code Reset


Canon imageRUNNER 1730 Fuser Removal and Replacement

Bear in mind, not every error is absolutely alike. What fixes the trouble one time might not solve it the next time. While the tips in this page is taken from the service manual and oftentimes should get your piece of equipment ready to go, in some cases additional factors can be in play.

If you are looking at this piece of content and have expertise in this error and want to share please make sure to leave a comment down below. Or, if you have read this article and have more questions then ask. If I have information about the issue then I will answer back.

We will be happy to hear your thoughts

Leave a reply

Shopping cart