Canon imageRUNNER 1730 E822 0004 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730 E822 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730 E822 0004 Error Code
E822 0004
Description :
Delivery Cooling Fan (Rear) (FM1) error
Causes :
A lock signal was detected for 5 seconds while the Delivery Cooling Fan (Rear) (FM1) was being driven.
The same status was detected again after executing an error retry.
Solutions :
1. Disconnect and then connect the connector (J210) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Delivery Cooling Fan (Rear) (FM1).
3. Replace the DC Controller PCB (PCB1).
Always remember, not every error is totally the same. What remedies the problem one occasion may possibly not resolve it the next occasion. While the material in this document obtain from the service manual and in most cases ought to get your unit operating, now and again other variables might be in play.
If you are looking at this piece of content and have experience with this error and want to share please be sure to leave a comment beneath. Or, if you have read this article and have further questions then ask. If I have experience with the issue then I will answer.
