Canon imageRUNNER 1730 E822 0001 Error Code

 

Canon imageRUNNER 1730 E822 0001 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1730 E822 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1730 E822 0001 Error Code

Service Manual Instructions for the Canon imageRUNNER 1730 E822 0001 Error Code

E822 0001
Description :
Error in rotation of the Delivery Cooling Fan (Front) (FM3)

Causes :
A lock signal was detected for 5 seconds while the Delivery Cooling Fan (Front) (FM3) was being driven.
The same status was detected again after executing an error retry.

Solutions :
1. Disconnect and then connect the connector (J210) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Delivery Cooling Fan (Front) (FM3).
3. Replace the DC Controller PCB (PCB1).



Always remember, not every error is totally the same. What corrects the malfunction one time may possibly not take care of it the next time. While the details in this posting comes from the service manual and in most cases should get your product ready to go, now and again other elements might be in play.

If you are looking at this page and have information about this error and would wish to make a contribution please be sure to leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have exposure to the trouble then I will answer.

We will be happy to hear your thoughts

Leave a reply

Shopping cart