Canon imageRUNNER 1730 E805 0002 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730 E805 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730 E805 0002 Error Code
E805 0002
Description :
Heat Exhaust Fan (Front) (FM5) error
Causes :
A lock signal was detected for 5 seconds while the Heat Exhaust Fan (Front) (FM5) was being stopped.
The same status was detected again after executing an error retry.
Solutions :
1. Disconnect and then connect the connector (J212) on the DC Controller PCB (PCB1) to check the connection.
2. Replace the Heat Exhaust Fan (Front) (FM5).
3. Replace the DC Controller PCB (PCB1).
Always remember, not every error is totally identical. What corrects the issue one time may possibly not eliminate it the next occasion. While the specifics in this short article hails from the service manual and in most cases should get your product working, sometimes additional variables might be in play.
If you are looking at this page and have expertise in this problem and want to make a contribution make sure you leave a comment below. Or, if you have read this article and have more questions then ask. If I have exposure to the situation then I will respond.
