Canon imageRUNNER 1730 E577 8001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730 E577 8001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730 E577 8001 Error Code
E577 8001
Description :
Paddle Motor (M3) error
Causes :
Although the Paddle Motor (M3) was driven for 175 steps, the Paddle failed to move from the Paddle HP Sensor (S3).
Solutions :
1. Check the connector connection of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
2. Check for open circuit of the Harness of the Paddle HP Sensor (S3) or the Paddle Motor (M3).
3. Replace the Paddle HP Sensor (S3).
4. Replace the Paddle Motor (M3).
5. Replace the Finisher Controller PCB.
Always remember, not every error is simply identical. What fixes the issue one time may not get rid of it the next occasion. While the details in this document is obtained from the service manual and in most cases should get your unit operational, occasionally additional circumstances may be in play.
If you are looking at this document and have knowledge of this error message and desire to share please be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the problem then I will answer back.
