Canon imageRUNNER 1730 E540 8001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730 E540 8001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730 E540 8001 Error Code
E540 8001
Description :
Stack Tray Shift Motor (M8) error
Causes :
The Stack Tray Shift Motor (M8) was driven for 4 seconds, but the Stack Tray shifting operation could not be completed.
Solutions :
1. Check the connector connection of the Stack Tray Paper Height Sensor (S9) or the Stack Tray Shift Motor (M8).
2. Check for open circuit of the Harness of the Stack Tray Paper Height Sensor (S9) or the Stack Tray Shift Motor (M8).
3. Replace the Stack Tray Paper Height Sensor (S9).
4. Replace the Stack Tray Shift Motor (M8).
5. Replace the Finisher Controller PCB.
Always remember, not every error is simply alike. What remedies the situation one time might not resolve it the next occasion. While the data in this document is obtained from the service manual and generally ought to get your product up and running, from time to time other reasons can be in play.
If you are looking at this document and have knowledge about this error and desire to make a contribution please be sure to leave a comment down below. Or, if you have read this article and have more questions then ask. If I have information about the difficulty then I will respond.
