Canon imageRUNNER 1730 E196 0000 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730 E196 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730 E196 0000 Error Code
E196 0000
Description :
EEPROM access error
Causes :
During communication with EEPROM, a communication error occurred, and the error was not cleared although a retry was executed three times.
If paper is being fed, the error occurs after the paper has been delivered.
Solutions :
1. Replace the DC Controller PCB (PCB1).
Always remember, not every error is completely the same. What treats the issue one time will possibly not fix it the next occasion. While the guidance in this document comes from the service manual and generally should get your piece of equipment ready to go, from time to time additional factors might be in play.
If you are looking at this blog post and have experience with this problem and would wish to contribute please be sure to leave a comment down below. Or, if you have read this article and have more questions then ask. If I have knowledge about the difficulty then I will answer back.
