Canon imageRUNNER 1730 E110 0003 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730 E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730 E110 0003 Error Code
E110 0003
Description :
Laser Scanner Motor error
Causes :
The speed lock signal of the Laser Scanner Motor never showed lock status although 6.5 seconds (when switching from low speed to normal speed) or 8 seconds (when switching from normal speed to low speed) have passed.
When the same status was detected again after executing an error retry.
Solutions :
1. Check the Laser Scanner Unit connector.
2. Replace the Laser Scanner Unit.
3. Replace the DC Controller PCB (PCB1).
Always remember, not every error is completely the same. What treats the issue one occasion may possibly not get rid of it the next occasion. While the help and advice in this write-up obtain from the service manual and most likely ought to get your unit working, at times additional factors can be in play.
If you are looking at this blog post and have experience with this malfunction and want to make a contribution you should leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will answer.
