Canon imageRUNNER 1730 E013 0001 Error Code

 

Canon imageRUNNER 1730 E013 0001 Error Code Instructions

Below you will find the service manual information for the Canon imageRUNNER 1730 E013 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon imageRUNNER 1730 E013 0001 Error Code

Service Manual Instructions for the Canon imageRUNNER 1730 E013 0001 Error Code

E013 0001
Description :
Error in rotation of Waste Toner Motor (M3)

Causes :
Lock detection flag was monitored every 2msec, and the same level was detected 600 times in a row.

Solutions :
1. Check the connector connection between the Waste Toner Motor and the DC Controller PCB (J209).
2. Replace the Waste Toner Motor (M3).
3. Replace the DC Controller PCB (PCB1).



Always remember, not every error is absolutely the same. What remedies the difficulty one time may possibly not resolve it the next time. While the guidance in this article originates from the service manual and most often ought to get your product operational, now and again additional variables can be in play.

If you are looking at this article and have information about this error and want to contribute make sure you leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have information about the difficulty then I will answer.

We will be happy to hear your thoughts

Leave a reply

Shopping cart