Canon imageRUNNER 1730 E001 0001 Error Code Instructions
Below you will find the service manual information for the Canon imageRUNNER 1730 E001 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon imageRUNNER 1730 E001 0001 Error Code
E001 0001
Description :
Detection of overheating of Fixing Assembly
Causes :
The hardware circuit detected overheating of the Main Thermistor or Sub Thermistor for 30 msec or longer.
Solutions :
1. Go through the following to clear the error: CLEAR > ENGIN > ERRCLR in Service Mode; then, turn OFF and then ON the power.
2. Replace the DC Controller PCB (PCB1).
Always remember, not every error is absolutely alike. What remedies the issue one occasion will possibly not resolve it the next time. While the tips in this page is taken from the service manual and oftentimes should get your machine working, from time to time other variables could possibly be in play.
If you are looking at this article and have experience with this malfunction and would like to contribute you should leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have exposure to the difficulty then I will reply.
