Canon-imageRUNNER-4570 E674 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E674 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E674 0001 Error Code
E674 0001
Description :
An error has occurred in communication between the fax control PCB (2-line) and main controller PCB.
Causes :
An attempt to set mode for the fax device has failed.
Solutions :
1. Check the connection of the cable between the fax control PCB (2-line) and the main controller PCB.
2. Replace the ROM DIMM of the fax control PCB (2-line).
3. Replace the fax control PCB (2-line).
4. Replace the main controller PCB.
If you’re reading this post and have knowledge of this error and would like to share be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the problem then I will answer.
Understand, not every error is completely identical. What remedies the difficulty one time may not eliminate it the next time. While the help and advice in this posting obtain from the service manual and in most cases ought to get your equipment ready to go, in some cases additional circumstances might be in play.
