Canon-imageRUNNER-4570 E261 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E261 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E261 0000 Error Code
E261 0000
Description :
The zero-cross signal is faulty.
Causes :
When the relay is on, the zerocross signal is not detected for 500 msec or more.
Solutions :
Replace the AC driver PCB.
Replace the DC controller PCB.
If you’re reading this post and have expertise in this problem and desire to share please make sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have knowledge about the difficulty then I will answer back.
Understand, not every error is absolutely alike. What remedies the trouble one occasion might not take care of it the next time. While the advice in this short article derives from the service manual and normally should get your piece of equipment up and running, at times other elements could possibly be in play.
