Canon-imageRUNNER-4570 E248 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E248 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E248 0000 Error Code
E248 0000
Description :
The backup memory is faulty.
Causes :
[Cause] A check error has occurred on the backup SRAM board.
[Location] bottom ROM
[Timing of Detection] once when the boot ROM is started up
Solutions :
1. Check the presence/absence of a backup SRAM PCB.
2. Disconnect and then connect the backup SRAM PCB.
3. Replace the backup SRAM PCB with a new one.
If you’re reading this post and have experience with this problem and would like to share please leave a comment below. Or, if you have read this article and have additional questions then ask. If I have information about the trouble then I will answer back.
Try to remember, not every error is totally the same. What remedies the issue one time might not resolve it the next occasion. While the help and advice in this blog post is taken from the service manual and in most cases ought to get your product functioning, occasionally other reasons may be in play.
