Canon-imageRUNNER-4570 E227 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E227 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E227 0002 Error Code
E227 0002
Description :
The reader unit power supply is faulty.
Causes :
At the start of a job, the 24-V port is off.
Solutions :
Disconnect and then connect the power supply harness connector.
Replace the power supply.
If you’re reading this post and have experience with this error and would like to share please leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the problem then I will answer back.
Try to remember, not every error is totally the same. What corrects the malfunction one time may possibly not eliminate it the next time. While the info in this post comes from the service manual and generally should get your unit up and running, sometimes other causes may be in play.
