Canon-imageRUNNER-4570 E110 0003 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E110 0003 Error Code
E110 0003
Description :
The scanner motor is faulty.
Causes :
With the image clock switched over, the scanner motor speed lock signal does not indicate a locked state 6.5 sec after a switchover is made from low to normal speed or 8 sec after a switchover is made from normal to low speed.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
Canon FM2-0334-000 Laser/Scanner Unit (Genuine) – $349.95
from: Precision Roller
If you’re reading this piece of content and have information about this problem and would like to make a contribution please make sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have information about the situation then I will respond.
Try to remember, not every error is simply the same. What corrects the condition one time might not take care of it the next occasion. While the material in this text is obtained from the service manual and typically should get your product up and running, from time to time other reasons can be in play.
