Canon-imageRUNNER-4570 E100 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E100 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E100 0001 Error Code
E100 0001
Description :
The BD interval is outside a specific range.
Causes :
After the machine has become ready for image formation (i.e., the scanner motor is ready for operation, and the laser has been turned on), an error has occurred 50 times or more (BD error).
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
Canon FM2-0334-000 Laser/Scanner Unit (Genuine) – $349.95
from: Precision Roller
If you’re reading this piece of content and have information about this fault and would wish to contribute please leave a comment below. Or, if you have read this article and have more questions then ask. If I have knowledge about the situation then I will respond.
Try to remember, not every error is simply identical. What corrects the condition one time may possibly not get rid of it the next occasion. While the data in this short article hails from the service manual and most often should get your piece of equipment operational, sometimes other factors can be in play.
