Canon-imageRUNNER-4570 E064 0005 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E064 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E064 0005 Error Code
E064 0005
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you’re reading this piece of content and have information about this error and want to make a contribution be sure to leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will respond.
Try to remember, not every error is simply identical. What corrects the condition one time may not resolve it the next time. While the data in this blog derives from the service manual and typically should get your piece of equipment working, from time to time other variables can be in play.
