Canon-imageRUNNER-4570 E064 0004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E064 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E064 0004 Error Code
E064 0004
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the controller PCB.
If you’re reading this piece of content and have information about this error and desire to make a contribution please make sure to leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have experience with the problem then I will answer back.
Try to remember, not every error is simply alike. What remedies the condition one occasion may possibly not fix it the next occasion. While the content in this short article is obtained from the service manual and oftentimes should get your machine operating, at times additional factors could possibly be in play.
