Canon-imageRUNNER-4570 E064 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E064 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E064 0002 Error Code
E064 0002
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the primary DC voltage is 230 (DEC) or more for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you’re reading this piece of content and have exposure to this malfunction and would like to contribute please leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have information about the situation then I will respond.
Try to remember, not every error is precisely the same. What fixes the issue one time might not exactly take care of it the next occasion. While the info in this page derives from the service manual and usually should get your machine ready to go, from time to time additional factors might be in play.
