Canon-imageRUNNER-4570 E025 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-4570 E025 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-4570 E025 0001 Error Code
E025 0001
Description :
The hopper motor or the bottle motor is faulty.
Causes :
While the hopper motor is rotating, the motor error lock signal is detected continuously 4 times every 56 msec. Or, while the bottle motor is rotating, the motor error lock signal is detected 22 times in sequence every 10 msec.
Solutions :
Replace the hopper motor.
Replace the bottle motor.
Replace the DC controller PCB.
If you’re reading this piece of content and have exposure to this error and would like to make a contribution please make sure to leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have knowledge about the trouble then I will reply.
Try to remember, not every error is precisely alike. What treats the problem one time may not remedy it the next occasion. While the data in this writing originates from the service manual and typically ought to get your product functioning, now and again other causes might be in play.
