Canon-imageRUNNER-4570 E001 0002 Error Code

 

Canon-imageRUNNER-4570 E001 0002 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-4570 E001 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-4570 E001 0002 Error Code

Service Manual Instructions for the Canon-imageRUNNER-4570 E001 0002 Error Code

E001 0002
Description :
The temperature of the fixing assembly is abnormally high.

Causes :
The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.




Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the sub thermistor.
Replace the DC controller PCB.


Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95

Canon imageRUNNER 4570 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000


Canon imageRUNNER 4570 E000, E001, E002, E003, Error Code Reset

If you’re reading this page and have knowledge about this fault and want to contribute you should leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have exposure to the issue then I will respond.

Try to remember, not every error is entirely the same. What remedies the issue one time might not exactly solve it the next occasion. While the tips in this document is inspired by the service manual and typically ought to get your piece of equipment working, at times other factors could possibly be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart