Canon-imageRUNNER-4570 E001 0001 Error Code

 

Canon-imageRUNNER-4570 E001 0001 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-4570 E001 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-4570 E001 0001 Error Code

Service Manual Instructions for the Canon-imageRUNNER-4570 E001 0001 Error Code

E001 0001
Description :
The temperature of the fixing assembly is abnormally high.

Causes :
The hardware circuit detects overheating of the main or sub thermistor for 200 msec.




Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the DC controller PCB.



Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95

Canon imageRUNNER 4570 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000


Canon imageRUNNER 4570 E000, E001, E002, E003, Error Code Reset

If you’re reading this page and have knowledge about this error message and would wish to make a contribution be sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have experience with the difficulty then I will respond.

Try to remember, not every error is entirely the same. What fixes the malfunction one occasion might not exactly remedy it the next time. While the information in this writing is inspired by the service manual and typically ought to get your equipment ready to go, now and again other factors might be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart