Canon-imageRUNNER-3570 E805 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3570 E805 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3570 E805 0000 Error Code
E805 0000
Description :
There is a fan error.
Causes :
While the fan is at rest, the lock signal has been detected for 5 sec.
While the fan is in operation, the lock signal is not detected for 5 sec.
Solutions :
Replace the fan.
Replace the DC controller PCB.
If you’re reading this page and have information about this error message and would wish to share please be sure to leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have experience with the difficulty then I will reply.
Try to remember, not every error is entirely identical. What corrects the problem one occasion might not get rid of it the next occasion. While the information in this writing is obtained from the service manual and oftentimes should get your piece of equipment working, at times other factors could possibly be in play.
