Canon-imageRUNNER-3570 E743 0000 Error Code

 

Canon-imageRUNNER-3570 E743 0000 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3570 E743 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3570 E743 0000 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3570 E743 0000 Error Code

E743 0000
Description :
There is an error in the DDI communication.

Causes :
An SCI error has occurred. The received data is faulty. A reception timeout condition has occurred. An SEQ timeout error has occurred.




Solutions :
Disconnect and then connect the flexible cable used to connect the reader unit and the printer unit.
Replace the following as necessary: flexible cable, reader controller PCB, main controller PCB.



If you’re reading this write-up and have exposure to this fault and wish to contribute make sure you leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have information about the problem then I will reply.

Understand, not every error is simply identical. What treats the situation one occasion will possibly not eliminate it the next occasion. While the help and advice in this writing is taken from the service manual and most often should get your device operating, now and again other reasons may be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart