Canon-imageRUNNER-3570 E730 9004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3570 E730 9004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3570 E730 9004 Error Code
E730 9004
Description :
There is a PDL software error.
Causes :
There is an error in the communication (PAI) with an external controller.
Solutions :
1. Turn on the power once main.
2. Check the connection of the open I/F board and the cable.
3. Replace the board for the external controller open I/F.
4. Replace the main board.
If you’re reading this write-up and have experience with this error and would like to make a contribution be sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have information about the issue then I will respond.
Understand, not every error is precisely identical. What treats the situation one time may not solve it the next occasion. While the content in this writing is inspired by the service manual and in most cases ought to get your machine working, at times additional factors might be in play.
