Canon-imageRUNNER-3570 E261 0000 Error Code

 

Canon-imageRUNNER-3570 E261 0000 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3570 E261 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3570 E261 0001 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3570 E261 0000 Error Code

E261 0000
Description :
The zero-cross signal is faulty.

Causes :
When the relay is on, the zerocross signal is not detected for 500 msec or more.




Solutions :
Replace the AC driver PCB.
Replace the DC controller PCB.



If you’re reading this post and have knowledge about this problem and desire to share be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have knowledge about the trouble then I will reply.

Understand, not every error is completely identical. What fixes the difficulty one occasion might not exactly fix it the next occasion. While the data in this writing obtain from the service manual and most likely ought to get your unit ready to go, at times additional factors can be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart