Canon-imageRUNNER-3570 E100 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3570 E100 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3570 E100 0001 Error Code
E100 0001
Description :
The BD interval is outside a specific range.
Causes :
After the machine has become ready for image formation (i.e., the scanner motor is ready for operation, and the laser has been turned on), an error has occurred 50 times or more (BD error).
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
Canon FM2-0334-000 Laser/Scanner Unit (Genuine) – $349.95
from: Precision Roller
If you’re reading this post and have experience with this error and would like to share please leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the problem then I will answer back.
Try to remember, not every error is totally the same. What corrects the malfunction one time may possibly not eliminate it the next time. While the info in this post comes from the service manual and generally should get your unit up and running, sometimes other causes may be in play.
