Canon-imageRUNNER-3570 E025 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3570 E025 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3570 E025 0001 Error Code
E025 0001
Description :
The hopper motor or the bottle motor is faulty.
Causes :
While the hopper motor is rotating, the motor error lock signal is detected continuously 4 times every 56 msec. Or, while the bottle motor is rotating, the motor error lock signal is detected 22 times in sequence every 10 msec.
Solutions :
Replace the hopper motor.
Replace the bottle motor.
Replace the DC controller PCB.
If you’re reading this piece of content and have information about this problem and would like to make a contribution please make sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have information about the situation then I will respond.
Try to remember, not every error is simply the same. What corrects the condition one time might not take care of it the next occasion. While the material in this text is obtained from the service manual and typically should get your product up and running, from time to time other reasons can be in play.
