Canon-imageRUNNER-3570 E020 0000 Error Code

 

Canon-imageRUNNER-3570 E020 0000 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3570 E020 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3570 E020 0000 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3570 E020 0000 Error Code

E020 0000
Description :
The path between the sub hopper and the developing assembly is clogged with toner.

Causes :
The developing assembly toner sensor detects the absence of toner, while the sub hopper toner sensor detects the presence of toner.
With the developing clutch turned on, the hopper feed screw motor is rotated for 1 sec intermittently 194 times; still, the developing assembly toner sensor does not detect the presence of toner.



Solutions :
Replace the developing assembly toner sensor.
Replace the sub hopper toner sensor.
Replace the DC control PCB.


Canon FK2-0358-000 Toner Sensor (Genuine) – $27.95

from: Precision Roller


If you’re reading this piece of content and have information about this fault and would wish to contribute please leave a comment below. Or, if you have read this article and have more questions then ask. If I have knowledge about the situation then I will respond.

Try to remember, not every error is simply identical. What corrects the condition one time may possibly not get rid of it the next occasion. While the data in this short article hails from the service manual and most often should get your piece of equipment operational, sometimes other factors can be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart