Canon-imageRUNNER-3570 E010 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3570 E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3570 E010 0002 Error Code
E010 0002
Description :
The rotation of the main motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you’re reading this piece of content and have exposure to this malfunction and would like to contribute please leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have information about the situation then I will respond.
Try to remember, not every error is precisely the same. What fixes the issue one time might not exactly take care of it the next occasion. While the info in this page derives from the service manual and usually should get your machine ready to go, from time to time additional factors might be in play.
