Canon-imageRUNNER-3570 E007 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3570 E007 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3570 E007 0000 Error Code
E007 0000
Description :
The rotation of the fixing film is faulty.
Causes :
While the fixing motor is rotating, the marker signal is not detected for 6 sec with the reading of the main thermistor indicating 100 deg C or more.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3570 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3570 E000, E001, E002, E003, Error Code Reset
If you’re reading this piece of content and have exposure to this error message and would like to make a contribution make sure you leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have exposure to the difficulty then I will respond.
Try to remember, not every error is precisely alike. What treats the trouble one occasion will possibly not eliminate it the next time. While the ideas in this post is taken from the service manual and most often should get your machine ready to go, now and again other things might be in play.
