Canon-imageRUNNER-3570 E002 0000 Error Code

 

Canon-imageRUNNER-3570 E002 0000 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3570 E002 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3570 E002 0000 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3570 E002 0000 Error Code

E002 0000
Description :
The rise in temperature of the fixing assembly is faulty.

Causes :
While startup control is under way, the reading of the main thermistor is less than 115 deg C continuously for 400 msec 1.3 sec after it has indicated 100 deg C.
While startup control is under way, the reading of the main thermistor is less than 150 deg C continuously for 400 msec 1.3 sec after it has indicated 140 deg C.



Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.


Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95

Canon imageRUNNER 3570 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000


Canon imageRUNNER 3570 E000, E001, E002, E003, Error Code Reset

If you’re reading this piece of content and have expertise in this problem and want to make a contribution you should leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the issue then I will respond.

Try to remember, not every error is precisely alike. What remedies the malfunction one occasion will possibly not solve it the next occasion. While the specifics in this write-up derives from the service manual and most often ought to get your device operating, at times additional circumstances may be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart