Canon-imageRUNNER-3570 E001 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3570 E001 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3570 E001 0002 Error Code
E001 0002
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the sub thermistor.
Replace the DC controller PCB.
Canon FM3-1293-020 Fuser (Fixing) Unit – 120 Volt (Genuine) – $599.95
Canon imageRUNNER 3570 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 3570 E000, E001, E002, E003, Error Code Reset
If you’re reading this piece of content and have expertise in this malfunction and would wish to make a contribution make sure you leave a comment down below. Or, if you have read this article and have further questions then ask. If I have exposure to the issue then I will reply.
Try to remember, not every error is precisely alike. What remedies the condition one occasion may possibly not take care of it the next time. While the info in this piece of content comes from the service manual and typically should get your device operational, sometimes other things might be in play.
