Canon-imageRUNNER-3530 E748 1001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E748 1001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E748 1001 Error Code
E748 1001
Description :
There is a mismatch between controller board and SDRAM size.
Causes :
There is a mismatch between the control board and the SDRAM.
Solutions :
Check the correct combination between board and SDRAM.
If you’re reading this piece of content and have experience with this fault and wish to share you should leave a comment below. Or, if you have read this article and have additional questions then ask. If I have knowledge about the trouble then I will answer back.
Try to remember, not every error is exactly identical. What treats the condition one occasion will possibly not solve it the next occasion. While the specifics in this blog is inspired by the service manual and most likely should get your piece of equipment ready to go, from time to time other things might be in play.
