Canon-imageRUNNER-3530 E227 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E227 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E227 0002 Error Code
E227 0002
Description :
The reader unit power supply is faulty.
Causes :
At the start of a job, the 24-V port is off.
Solutions :
Disconnect and then connect the power supply harness connector.
Replace the power supply.
If you’re reading this blog post and have information about this fault and would wish to make a contribution you should leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the issue then I will reply.
Take into account, not every error is precisely the same. What corrects the trouble one occasion will possibly not fix it the next occasion. While the help and advice in this writing originates from the service manual and normally ought to get your machine up and running, occasionally other things might be in play.
