Canon-imageRUNNER-3530 E202 0001 Error Code

 

Canon-imageRUNNER-3530 E202 0001 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3530 E202 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3530 E202 0001 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3530 E202 0001 Error Code

E202 0001
Description :
There is an error in the detection of the CIS home position.

Causes :
The attempt to detect the home position fails when the CIS is moved forward.




Solutions :
Disconnect and then connect the harness connector.
Replace the following as necessary: scanner home position sensor, scanner motor, reader controller PCB.



If you’re reading this blog post and have exposure to this error and want to contribute please make sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have knowledge about the trouble then I will reply.

Take into account, not every error is exactly the same. What treats the difficulty one time will possibly not remedy it the next occasion. While the data in this post is taken from the service manual and generally should get your equipment operating, now and again other variables might be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart