Canon-imageRUNNER-3530 E064 0004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E064 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E064 0004 Error Code
E064 0004
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the controller PCB.
If you’re reading this article and have knowledge of this fault and would wish to share make sure you leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the difficulty then I will answer.
Take into account, not every error is exactly identical. What corrects the complication one time may not fix it the next occasion. While the details in this article originates from the service manual and most likely should get your unit functioning, in some cases other variables may be in play.
