Canon-imageRUNNER-3530 E064 0003 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E064 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E064 0003 Error Code
E064 0003
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the developing DC voltage is 224 (DEC) or more for 10 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you’re reading this article and have knowledge of this error message and want to make a contribution please be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have information about the trouble then I will answer.
Take into account, not every error is exactly alike. What remedies the condition one time may not remedy it the next occasion. While the info in this write-up originates from the service manual and generally ought to get your unit functioning, at times other elements can be in play.
