Canon-imageRUNNER-3530 E064 0002 Error Code

 

Canon-imageRUNNER-3530 E064 0002 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-3530 E064 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-3530 E064 0002 Error Code

Service Manual Instructions for the Canon-imageRUNNER-3530 E064 0002 Error Code

E064 0002
Description :
The voltage of the power supply is faulty (high-voltage error).

Causes :
While output is being generated, the AD value of the primary DC voltage is 230 (DEC) or more for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)



Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.



If you’re reading this article and have knowledge of this error and desire to contribute you should leave a comment down below. Or, if you have read this article and have further questions then ask. If I have knowledge about the issue then I will respond.

Take into account, not every error is exactly alike. What fixes the issue one time will possibly not take care of it the next occasion. While the data in this write-up is taken from the service manual and oftentimes ought to get your device up and running, occasionally additional factors could possibly be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart