Canon-imageRUNNER-3530 E010 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-3530 E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-3530 E010 0002 Error Code
E010 0002
Description :
The rotation of the main motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you’re reading this article and have expertise in this problem and would wish to share please leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have exposure to the difficulty then I will answer.
Take into account, not every error is completely identical. What remedies the condition one occasion might not exactly fix it the next occasion. While the specifics in this short article is taken from the service manual and oftentimes should get your unit functioning, now and again other reasons can be in play.
